This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.

Last Update:

Are you looking for the Best Snips For Cutting Shingles. You are in the right place. Our team went through about 48875 reviews available online for Snips For Cutting Shingles. We chose the finest ones, and prepared this list for you.

Comparison Chart of Top 10 Snips For Cutting Shingles

Best Snips For Cutting Shingles
NoProductScoreAction
1TOOLEAGUE Aviation Tin Snips for Cutting Metal Sheet Tin Cutting Shears with Forged Blade9.8Buy On Amazon
2Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips - Straight9.4Buy On Amazon
3Midwest Tool & Cutlery MagSnips Replaceable Blade Snip - Left Cut Offset Vinyl Siding Cutting Sheers with 3.5" Cut Length & Magnesium Handles - MWT-22109.2Buy On Amazon
4DEWALT Metal Shears Attachment9.2Buy On Amazon
5MIDWEST Power Cutters Long Cut Snip - Straight Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-65169Buy On Amazon
6WORX WX081L 4V ZipSnip Cordless Electric Scissors8.8Buy On Amazon
7Cutting tools, Multi Angle Miter Shear Cutter Cuts 45 to 135 Degree Miter Snips Cutting Tool8.8Buy On Amazon
8Crescent Wiss 11" Multi-Purpose Cutter - MPX58.6Buy On Amazon
9Midwest Tool & Cutlery MagSnips Replaceable Blade Snip - Straight Cut Regular Sheet Material Cutting Shears with All Purpose Blades & Magnesium Handles - MWT-12008.4Buy On Amazon
10Tie Down 13806 Roof Zone Shingle Shaper Shingle Cutter8.2Buy On Amazon

Snips For Cutting Shingles Reviews

We have checked about 48875 reviews for snips for cutting shingles. It was quite difficult to shortlist the ideal ones from thousands of variants online. However, we've tried our best to make sure that you get only the best one from our suggestions.

Table Of Content:

1. TOOLEAGUE Aviation Tin Snips for Cutting Metal Sheet Tin Cutting Shears with Forged Blade

  • HIGH QUALITY MATERIAL: Made from high-quality CR-V steel.
  • WIDE APPLICATION: Cutting thickness range up to 1.
  • SAFE &HIGH EFFICIENCY: The metal safety lock is between the strong handles.
  • EASY CUTTING-Compound leverage multiplies handle force to cutting blades by 7:1 for significantly less fatigue.
  • PACKAGE CONTENT:Item includes 1 x tin snips long straight cut.

2. Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips – Straight

  • Cuts straight and slight curves with yellow handles for quick identification
  • Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel.
  • Blade serrations spread cutting force across jaws improving cut quality and tool life
  • Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs.
  • Ergonomic, single handed latch operation for left or right handed use
  • Free float design on the pivot bolt provides longer life
  • Spring action for fast, effortless feed
  • Handles have built in stops providing consistent operation and blade opening
  • Ergonomic, single material non slip handle grips provide excellent control and easy cleaning with built in hang hole for convenient storage.
  • Designed, engineered, and manufactured in the USA

3. Midwest Tool & Cutlery MagSnips Replaceable Blade Snip – Left Cut Offset Vinyl Siding Cutting Sheers with 3.5″ Cut Length & Magnesium Handles – MWT-2210

  • 3.5″ CUT LENGTH – Requires fewer cutting strokes leaving a smooth finished edge
  • OPTIMIZED POWER RANGE – Complete cuts before handles bottom out for most efficient conversion of hand force to cutting power.
  • REPLACEABLE BLADES – Blades are easily replaced using blade kit MW-M1200R
  • LEFT OFFSET CUT – Cuts to the left for use in the right hand
  • VERSITILE – Cuts aluminum and vinyl siding, roofing materials, metal flashing, linoleum, vinyl, rubber, canvas, cardboard, screening.

4. DEWALT Metal Shears Attachment

  • Able to cut up to 18GA material
  • 360 degree swivel head for maneuverability
  • Connects via standard 1/4-inch hex shank
  • Compatible with most 18V-20V impact driver and drills
  • Able to cut up to 18GA material
  • Connects via standard 1/4-inch hex shank
  • Compatible with most 18V-20V impact driver and drills

5. MIDWEST Power Cutters Long Cut Snip – Straight Cut Offset Tin Cutting Shears with Forged Blade & KUSH’N-POWER Comfort Grips – MWT-6516

  • It is a highly durable
  • It is easy to use
  • Manufactured in United States

6. WORX WX081L 4V ZipSnip Cordless Electric Scissors

  • STRONGER, BETTER SCISSORS] So what is the Zip Snip.
  • BLADE STAYS SHARP] The automatic sharpening system ensures you’ll always have a clean, smooth cut, on cloth, carpet, leather and more.
  • HOLDS A CHARGE FOR MONTHS] The 4V MaxLithium battery gives it the spin it needs to slice through materials, and holds that charge for a long time.
  • SAFETY FIRST] Both the trigger and the lock-out switch need to be pressed to make the Zip Snip operate, so it’ll only work when you’ve got a firm grasp on things.
  • DO IT YOURSELF.
  • BATTERY INDICATOR] Power level monitor on the Zip Snip lets you make sure that you’ll have enough charge for the job at hand.
  • ONLY 1 LBS] Not only can you work a long time without fatigue, but the Zip Snip is easy to maneuver
  • COMES WITH CHARGER] The battery is internal, so you just connect the included charger when you need to top it up.

7. Cutting tools, Multi Angle Miter Shear Cutter Cuts 45 to 135 Degree Miter Snips Cutting Tool

  • WIDELY USED】 Miter snips cutting tool for cutting plastic tubing,shoe moulding and most soft items, household decoration, making picture frames, daily tasks work activities or even DIY projects.
  • PREMIUM STAINLESS STEEL】Solid steel frame with plastic cover handle, comfortable to grip miter snips.
  • GOOD PERFORMANCE】45 Degree To 135 Degree, nice and clean cut, with no burrs.
  • STRONG & EASY TO OPERATE】Miter cutter has a built-in stencil for angle cuts.
  • QUALITY AFTER-SALE SERVICE】If you are not satisfied, you can refund unconditionally.

8. Crescent Wiss 11″ Multi-Purpose Cutter – MPX5

  • The Non-slip grips provide added comfort and durability
  • Compound action design delivers 1.
  • 3″ blade for making long cuts in a wide range of materials
  • Serrated blade helps hold material firmly for better cutting
  • Nickel chrome blades resist rust and corrosion

9. Midwest Tool & Cutlery MagSnips Replaceable Blade Snip – Straight Cut Regular Sheet Material Cutting Shears with All Purpose Blades & Magnesium Handles – MWT-1200

  • STRAIGHT SHEET MATERIAL CUTS – These lightweight shears are made to cut aluminum, vinyl, roofing material,.
  • 5″ LENGTH OF CUT – Requiring fewer cutting strokes and leaving a smooth finished edge, these shears can make 3.
  • LIGHTWEIGHT AND EFFICIENT – Made with a lightweight magnesium handle with optimal range of motion, this cutter is easy to use and efficient.
  • EASILY REPLACEABLE – The blades are easily replaced using blade kit MW-M1200R
  • MADE IN THE USA – This high quality Midwest tool is highly durable and made in the USA
  • 3.5-Inch (88.9mm) Length Of Cut requires fewer cutting strokes leaving a smooth finished edge.
  • Optimized Power Range completes cut before handles bottom out for most efficient conversion of hand force to cutting power.
  • Blades are easily replaced using blade kit MW-M1200R.
  • Cuts straight and wide curves. Use in either hand.
  • Cuts aluminum and vinyl siding, roofing materials, metal flashing, linoleum, vinyl, rubber, canvas, cardboard, screening.

10. Tie Down 13806 Roof Zone Shingle Shaper Shingle Cutter

  • Lightweight shingle cutter
  • Handle provides easy transport
  • Cuts and rips asphalt/fiberglass shingles
  • Includes angle meter on table
  • 1 per master carton

Snips For Cutting Shingles Buying Guide


Does the thought of finding a great Snips For Cutting Shingles stress you out? Has your mind been juggling between choices when it comes to buying Snips For Cutting Shingles in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Snips For Cutting Shingles for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Snips For Cutting Shingles Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Snips For Cutting Shingles in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Snips For Cutting Shingles currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Snips For Cutting Shingles brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Snips For Cutting Shingles based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Snips For Cutting Shingles before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Snips For Cutting Shingles they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Snips For Cutting Shingles, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Snips For Cutting Shingles before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Snips For Cutting Shingles will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Snips For Cutting Shingles if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Snips For Cutting Shingles on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Snips For Cutting Shingles on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Snips For Cutting Shingles featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
ToolsMisc. , Tools & Home Improvement